Congratulations Designs Set 0f 12

These are quick and easy cards to make!  Slide an extra sheet of tear way under hoop if you think it needs more!!

Designs in package

Congrats Balloons1 --4 x 5.0 inches --use sheers or Mylar for appliqués
Congrats Balloons2--4 x 4.8 inches

Congrats Fireworks---- use metallic thread--4.0 x 4.7 inches

 

 

Congrats Achievement---- use some metallic thread--4.2 x5.0 inches

Congrats Graduation---- use some metallic thread--4.0 x 4.3 inches
Congrats Engagement---- use some metallic thread--4.2 x 5.1 inches

 

                  

Congrats Wedding ! &  2---- use some sheer under the rose--4.0 x5.0 inches

Congrats Graduation Years 21 and 22 ---- use some metallic thread--4.0 x 5.0 inches (you need another yr just ask)
Congrats Engagement---- use some metallic thread--4.2 x 5.1 inches

 

 

Congrats Baby Girl or Boy (appliqué on bow or bowtie )---- use some metallic thread--4.0 x 5 inches

 

These are quick and easy cards to make!

All 6 5inch designs are stitched directly on the blank greeting cardstock.

The cardstock makes 6 1/2 x 5 inch cards and came with envelopes.

This was purchased from my local craft store. 

Steps:

1. Hoop a tear away stabilizer & spray top with Spray adhesive & Use a Sharp needle

2.  Find & mark with a light pencil dot the center front of the card

3.  Lay the card (wrong side down) on top of stabilizer-centering the the design & center of the card

4.  Hold card down firmly in place, start machine off very slowly to 2nd stitch and proceed slowly

5.  Make sure that the card stays flat on the stabilizer or the stitches will go through.

6. When the design is complete, trim excess stabilizer, place layer of cardstock or nice fabric to cover the inside.

Have fun adding your own personal messages to each individual card!

 

Do you have the Pfaff 130 mm or 150 mm All Fabric Hoops? 

This card fits perfectly in that hoop for the 3inch designs.

 

Return

The entire contents of this web site are copyright © 2001-2021

Judi Jaksa Custom Digitizer www.customdigitizer.com

Individual designs and pictures on this page are copyright © by their respective creators.